|
|
IBM - Network adapter - PCI - EN, Fast EN - 1 ports at Backoffice
IBM - Network adapter - PCI - EN, Fast EN - 1 ports
34L0901
|
This product is no longer available.
|
Adapter fault tolerance protects the server's network link from failure of the cable, connector, or adapter, by using a redundant link paired with the primary link in a backup mode. The redundant link can be a matching adapter, or for some IBM Netfinity servers may be a matching server-embedded 10/100 Ethernet connection. If a link fails, traffic is automatically transferred to the redundant link. The server stays up and running, and the transfer is transparent to both users and applications. The adapter supports PCI HotPlug when installed in a system that supports HotPlug, such as the Netfinity 5500 and 7000 MT10. This feature allows the adapter to be removed from the system and replaced with another adapter without powering off the system. The adapter supports adapter load balancing, enabling the server to add scaleable bandwidth as traffic demands grow. Adapter load balancing manages outgoing server traffic across up to four like adapters. Server bandwidth can scale up to 800Mbps in a full-duplex switched environment. This adapter also provides link protection through adapter fault tolerance. Auto-negotiation of speed and duplex mode facilitates the use of the adapter in shared or switched environments running at either speed. Complete diagnostic software is included for problem determination. Bus mastering architecture offers outstanding performance with low server CPU utilization. The adapter provides half-duplex and full-duplex operation. It is Plug and Play capable and Year 2000 ready.| Product Description | IBM network adapter - 1 ports | | Device Type | Network adapter | | Form Factor | Plug-in card | | Interface (Bus) Type | PCI | | Dimensions (WxDxH) | 2 cm x 12 cm x 8 cm | | Weight | 0.1 kg | | Ports Qty | 1 ports | | Data Link Protocol | Ethernet, Fast Ethernet | | Data Transfer Rate | 100 Mbps | | Compliant Standards | IEEE 802.3, IEEE 802.3u | | System Requirements | Microsoft Windows 95, Microsoft Windows NT 3.51, Novell NetWare 3.11, IBM OS/2 Warp Connect 3.0, UnixWare 2.x, IBM OS/2 2.11 | | Manufacturer Warranty | Limited lifetime warranty |
GENERAL |
| Device Type | Network adapter - 1 ports |
| Form Factor | Plug-in card |
| Interface (Bus) Type | PCI |
| Width | 2 cm |
| Depth | 12 cm |
| Height | 8 cm |
| Weight | 0.1 kg |
NETWORKING |
| Connectivity Technology | Wired |
| Data Link Protocol | Ethernet, Fast Ethernet |
| Data Transfer Rate | 100 Mbps |
| Remote Management Protocol | SNMP |
| Status Indicators | Port status |
| Features | Full duplex capability |
| Compliant Standards | IEEE 802.3, IEEE 802.3u |
EXPANSION / CONNECTIVITY |
| Interfaces | 1 x network - Ethernet 10Base-T/100Base-TX - RJ-45 - 1 |
| Compatible Slots | 1 x PCI - half-length |
MISCELLANEOUS |
| Compliant Standards | Plug and Play |
| Package Type | Retail |
SOFTWARE / SYSTEM REQUIREMENTS |
| Software Included | Drivers & Utilities |
| OS Required | Microsoft Windows 95, Microsoft Windows NT 3.51, Novell NetWare 3.11, IBM OS/2 Warp Connect 3.0, UnixWare 2.x, IBM OS/2 2.11 |
| Min Processor Type | Intel 486 or higher - 33 MHz |
MANUFACTURER WARRANTY |
| Service & Support | Limited lifetime warranty |
| Service & Support Details | Limited warranty - replacement - lifetime - carry-in |
ENVIRONMENTAL PARAMETERS |
| Min Operating Temperature | 0 °C |
| Max Operating Temperature | 55 °C |
| Humidity Range Operating | 10 - 80% |
|
|
|
